CMC News

When to Consider Elliptical Reinforced Concrete Pipe for Stormwater Drainage

Written by Admin | Nov 16, 2026

Stormwater drainage projects must balance hydraulic capacity, structural requirements, available space, and installation conditions. When available cover, site elevations, utility conflicts, or other constraints make a conventional round pipe profile difficult to accommodate, elliptical reinforced concrete pipe (RCP) provides another configuration for consideration.

County Materials manufactures horizontal elliptical (HE) and vertical elliptical (VE) RCP for project-specific drainage applications. Elliptical RCP is available in horizontal elliptical (HE) and vertical elliptical (VE) configurations. HE pipe has a wider horizontal dimension and reduced vertical profile, making it useful to evaluate where available cover or installation depth is constrained. VE pipe has a greater vertical dimension relative to its width and may be evaluated where site geometry or hydraulic objectives favor that orientation. Selecting the appropriate profile requires consideration of hydraulic performance, loading, available cover, soil and installation conditions, and connections to the surrounding drainage system.

Understanding how pipe geometry affects available space, hydraulic performance, system layout, and installation requirements can help project teams determine when elliptical RCP should be evaluated alongside conventional round pipe.

How Elliptical RCP Differs From Round RCP

Unlike round RCP, elliptical RCP uses unequal horizontal and vertical dimensions to provide different profile options within a drainage corridor. This geometry can give designers additional flexibility when available cover, roadway elevations, utility locations, or other dimensional constraints influence pipe placement.

County Materials offers elliptical RCP in sizes ranging from 18-inch to 120-inch round-equivalent dimensions. Depending on size and configuration, gasketed joint options are available to support project requirements for joint performance and infiltration control. Available sizes, configurations, and joint options should be confirmed for the specific project.

Two profiles address different design considerations:

    • Horizontal Elliptical (HE) RCP: The wider horizontal dimension and reduced vertical profile make HE RCP an option to evaluate where available cover, excavation depth, roadway elevations, or other vertical constraints affect pipe placement. Its geometry may also provide hydraulic advantages under certain design conditions compared with a round pipe having similar vertical constraints. Hydraulic capacity should be confirmed through project-specific calculations.
    • Vertical Elliptical (VE) RCP: The greater vertical dimension and narrower horizontal profile provide another configuration where site geometry or hydraulic requirements influence pipe selection. Where low-flow hydraulic performance is an important design consideration, designers may evaluate whether the VE profile supports the required flow characteristics.

ASTM C507 and AASHTO M207 establish material, manufacturing, and strength requirements for horizontal and vertical elliptical reinforced concrete pipe. Beyond pipe profile, selection requires consideration of hydraulic capacity, cover, anticipated loads, soil support, bedding and backfill, joint configuration, connections, and applicable project specifications. HE pipe's reduced vertical profile can make it useful to evaluate where the required hydraulic opening must be accommodated within limited vertical space. Final hydraulic and structural performance must be confirmed using project-specific calculations and applicable standards.

What Factors Should Engineers Consider When Selecting an Elliptical Pipe Profile?

Selecting between round, HE, and VE reinforced concrete pipe requires more than comparing nominal pipe sizes. Pipe geometry must work within the site's hydraulic, structural, dimensional, and installation requirements. Several factors should be evaluated together:

Available Cover and Elevations

Finished grades, roadway elevations, downstream connection elevations, and minimum cover requirements can limit the vertical space available for a drainage pipe. Where vertical clearance is constrained, the reduced vertical profile of HE RCP may provide another configuration for evaluation.

Hydraulic Requirements

Design flow, pipe slope, flow depth, velocity, inlet and outlet conditions, and the geometry of the pipe influence hydraulic performance. Elliptical and round profiles should be evaluated using project-specific hydraulic calculations rather than geometry alone.

Structural and Installation Conditions

Anticipated earth and traffic loads, cover, bedding, backfill, soil support, and installation conditions affect structural design and pipe selection. The selected elliptical pipe class and installation must satisfy the requirements of the specific project.

Utilities and Connections

Existing utilities, required separation distances, drainage structures, and upstream and downstream connections can further restrict pipe placement. Coordinating these conditions early can help determine whether an elliptical profile offers a practical advantage within the available corridor.

Final pipe selection should be based on project-specific hydraulic and structural calculations, site conditions, and applicable specifications. The selected profile must meet the drainage system's performance requirements under the anticipated installation and loading conditions.

Where Can Elliptical RCP Help Address Drainage Constraints?

Commercial and Development Sites

Commercial, residential, and multifamily developments often require stormwater infrastructure to fit beneath parking areas, streets, buildings, landscaped areas, and networks of other underground utilities. Finished grades, building locations, utility corridors, and downstream drainage elevations can limit the space available for pipe installation.

Where vertical clearance or excavation depth is constrained, HE RCP may provide another profile for designers to evaluate. Selection should account for required flow, pipe slope, cover and anticipated loads, utility conflicts, connections, and construction sequencing.

Municipal Stormwater Systems

Municipal stormwater projects may involve new construction, roadway improvements, drainage upgrades, or connections to established systems where existing elevations and utilities limit design flexibility. HE RCP may be evaluated where roadway elevations, existing utilities, or available cover constrain the vertical space available for stormwater conveyance.

VE RCP may also warrant evaluation where its geometry supports project-specific hydraulic or dimensional requirements. In either configuration, pipe selection should account for hydraulic capacity, structural loading, soil and bedding conditions, joint requirements, agency specifications, connections, construction staging, maintenance, and long-term system performance.

Transportation Drainage Systems

Highways, local roads, interchanges, and other transportation infrastructure require drainage systems to accommodate hydraulic demands within roadway geometry, embankments, existing infrastructure, and agency requirements. Available cover, traffic loading, earth fills, excavation limits, and construction staging can all influence pipe selection.

HE RCP may be evaluated for roadway drainage or crossing applications where vertical clearance or available cover limits the pipe profile. VE RCP may be considered where its geometry supports project-specific hydraulic or dimensional objectives. In either case, designers should verify hydraulic capacity, structural requirements, soil support, bedding and backfill, connections, and applicable transportation agency specifications.


Constrained Utility Corridors

Stormwater systems often share underground corridors with water, sanitary sewer, electrical, telecommunications, and other utilities. Existing elevations, separation requirements, structures, and installation access can restrict the dimensions available for drainage pipe.

Coordinating Elliptical RCP With Related Drainage Products

Elliptical RCP typically functions as one component within a larger stormwater system. Depending on the project, that system may include catch basins, inlets, manholes, junction boxes, end treatments, box culverts, and other precast drainage components.

Pipe profile and dimensions should be coordinated with structure openings, invert elevations, connection details, joint requirements, and adjacent infrastructure. Because available configurations vary by pipe size, profile, and structure type, compatibility and connection details should be confirmed for each project.

  • Box Culverts and Aprons: Convey water through crossings and help manage transitions at culvert openings.
  • Catch Basins: Collect surface runoff and provide access to underground drainage connections.
  • End Treatments: Finish culvert openings and help manage the transition between the pipe and surrounding area.
  • Inlets: Collect stormwater runoff and direct it into the drainage network.
  • Junction Boxes: Connect drainage lines at pipe intersections or changes in alignment.
  • Manholes: Provide access to underground drainage infrastructure for inspection and maintenance.

Coordinating pipe dimensions, connection details, structure locations, and elevations during design helps project teams assess compatibility and plan installation. The appropriate components and connection details should be confirmed for each project; not every structure or joint configuration is suitable for every elliptical pipe size or profile.


Consider Long-Term Performance Along with Pipe Geometry

Pipe geometry addresses only one part of drainage-system design. Project teams also evaluate structural performance, environmental exposure, inspection and maintenance requirements, service-life expectations, and lifecycle considerations when selecting infrastructure materials.

Reinforced concrete pipe combines the required conduit with a rigid structural system and has an established history of use in municipal, transportation, and stormwater infrastructure. Long-term performance depends on appropriate design, product selection, installation, site conditions, and maintenance.

The American Concrete Pipe Association identifies a service life of 100 years or more as achievable for properly designed reinforced concrete pipe systems. Actual service life depends on design, installation, and site conditions.

Lifecycle cost analysis also considers more than initial material costs. The ACPA recommends evaluating service life, maintenance, rehabilitation, and replacement costs when comparing drainage materials. The long service life and durability of reinforced concrete pipe can help reduce lifecycle maintenance needs, making it a sustainable and cost-effective investment for communities.

When Should Elliptical RCP Be Evaluated?

Elliptical RCP can provide another design option when hydraulic requirements must be balanced with limited cover, fixed elevations, utility conflicts, roadway geometry, or other dimensional constraints. HE and VE profiles provide different geometries, making selection dependent on the specific hydraulic, structural, and installation requirements of the project.

Evaluating pipe profile alongside hydraulic capacity, loading, cover, connections, soil conditions, and constructability early in design can help project teams determine whether round, HE, or VE reinforced concrete pipe is appropriate for the drainage system.

County Materials manufactures elliptical reinforced concrete pipe and related precast drainage components for stormwater and infrastructure applications.

Explore Elliptical RCP Sizes, Configurations, and Product Resources:
https://www.countymaterials.com/pipe-and-underground-infrastructure/reinforced-concrete-pipe/elliptical

Sources for verification: