Winston® Retaining Wall System Winston® Retaining Wall System

Add depth and texture with the Winston® concrete retaining wall system

Each Winston Retaining Wall unit features a pair of full cores making these lightweight and easy to handle.

Winston offers straight splitface, or a tri-split option that adds depth to any wall. Tri-split units weigh just 60 pounds, and Winston has a bottom lip for a 3/4-inch setback and secure stacking.


  • Raised patios, walkways or driveways
  • Straight, curved or serpentine walls
  • Terraces on steep grades
  • Planting beds on grades or flat ground
  • Tree rings


  • Maximum 48" height
  • 48" inside radius, 72" outside radius
  • Both tri-split and straight units feature a small "v" notch on the bottom back face allow for a split down the middle to create half block for corners or other applications.


Winston Unit Tri-Split


12" D x 6" H x 16" L


Winston Corner Tri-Split


12" D x 6" H x 8" L

Winston Unit Straight Face


12" D x 6" H x 17 5/8" L


Winston Corner Straight Face


12" D x 6" H x 8 13/16" L

Straight Wall Cap


12" D x 3 5/8" H x 15 1/2" L


Winston® Retaining Wall System

Product Resources:

Note: Maximum recommended wall height for Winston units should not exceed 4 feet.


For more information about this product, please contact us or call our National Customer Service Center at (800) 242-7733.

Colors, product data, and availability are subject to change without notice. Please confirm all details with a County Materials representative for availability in your area. Colors shown may vary from actual hues and should only be used as a guide. Refer to actual product samples for final color selection.