One block. One size. The rest is up to your ingenuity. Perfect for random patterns, stack Summit Stone™ units horizontally, vertically or on any end to achieve limitless natural, weathered looks.

Ideal for small fences, pillars, seat walls and steps that need real visual impact. These tumbled blocks in five natural tones install easily and accentuate your design.

Highlights

Ideal for decorative structures under three feet
Same durability as all County Materials’ retaining walls and paving units
Concrete adhesive bonds to block surfaces
One size block does it all Needs no caps, corners, pins or clips

COLORS AVAILABLE

Cedar Blend
Desert Sand
Driftwood
Iron River
Old World

Due to the nature of concrete and variables within photography, colors shown may vary from actual hues. Please refer to products for final color selection.

*Colors shown are not available in all markets. Please ask a local County Materials Sales Representative for color availability in your market.

^ top

PRODUCT SPECIFICATIONS

Summit Stone Logo

Summit Stone Illustration

11" D x 3-5/8" H x 7-1/4 " L

SUMMIT STONE PILLAR AND
PIER CONSTRUCTION

Summit Stone™ is designed to let you build decorative pillars and piers as individual accents or in combination with small decorative walls. No cutting or fitting is required.

Summit Stone Pillar and Pier Construction Illustration showing adhesives, cap layer and application of lights or lumber for support

To make a pier with Summit Stone, place units in alternating layers as shown in the illustration above. Make sure you build on level and well compacted ground.
Apply concrete adhesive between each course as you construct the pillar. Place adhesive on the touching ends and undersides of each cap.
The hollow area inside of each pillar can accommodate electrical conduit for a light or a wood 4" x 4" to support
a trellis, a lamp post or a garden gate.

NOTE:
Outside measurements of cap layer will be approximately 22" x 22" . Post and wall heights should not exceed 36" .

For decorative walls, columns and steps, 1 to 2 layers of Summit Stone units should be buried below grade for proper embedment.

Summit Stone™ Landscape Units

Stackable, versatile, natural

PRODUCT SPECIFICATIONS

11" D x 3-5/8" H x 7-1/4 " L

SUMMIT STONE PILLAR AND PIER CONSTRUCTION

Summit Stone™ is designed to let you build decorative pillars and piers as individual accents or in combination with small decorative walls. No cutting or fitting is required.

NOTE: Outside measurements of cap layer will be approximately 22" x 22" . Post and wall heights should not exceed 36" . For decorative walls, columns and steps, 1 to 2 layers of Summit Stone units should be buried below grade for proper embedment.

SUMMIT STONE PILLAR AND
PIER CONSTRUCTION

NOTE:
Outside measurements of cap layer will be approximately 22" x 22" . Post and wall heights should not exceed 36" .

For decorative walls, columns and steps, 1 to 2 layers of Summit Stone units should be buried below grade for proper embedment.