Pavers & Patio Stones H20 Pro Pavers™
 
 

H20 Pro Pavers®

Storm water management with permeable paving units

H20 Pro Pavers H2O Pro Pavers® are the ideal storm water management product for reducing surface runoff and flooding, while maintaining a structural pavement for vehicle and foot traffic. As growing metropolitan communities demand more parking areas, roads and driveways, there is a reduced capacity for natural, sustainable infiltration. H2O Pro Pavers offer a cost-effective and low impact system to better manage environmental and economic impacts from storm water runoff and sediment while replenishing groundwater.

H2O Pro Pavers allow rain to infiltrate through the full perimeter joints of each paver into specially designed sub-base materials. Rainwater is naturally filtrated through the base materials before recharging the groundwater. H2O Pro Pavers can also be used to release storm water in a controlled method into retention or nonpotable irrigation systems.

Benefits

H20 Pro Pavers Installation
  • Ideal water management system for residential, municipal and commercial applications, for both small and large-scale projects.
  • Great for use in residential areas without downspouts or proper drainage materials.
  • Environmentally friendly, allowing pollutants to be filtered and broken down “naturally”, keeping lakes, streams, rivers and other
    waterways cleaner.

Installation guidelings

1. Excavate an area to the appropriate depth. Consider the following site conditions:

  • Water table height
  • Rainfall frequency
  • Storm water volume
  • Permeability of sub-grade
  • Special drainage considerations

2. Backfill with clean 2” - 3” open graded (clear crushed) aggregates. This sub base material generally comprises a minimum 12” thick layer, vibrated in 4-inch lifts using a plate compactor.

3. Add a 4” base course of 3/4” - 1” open graded (clear crushed) aggregates over the compacted sub base.

4. Screed level a 2” bedding course of 3/8” open graded (clear crushed) aggregates over the base material before the installation of H2O Pro Pavers. This is the same material used in the drainage voids between pavers.

^ top

 

 

 

PRODUCT SPECIFICATIONS


H20 Pro Pavers
H20 Pro Paver®
H20 Pro Paver

4 1/8" D x 3 1/8" H x 8 1/4" L
4.25 pieces/sq. ft.

Units per pallet: 480
Weight per unit: 7.4 lbs.
Weight per pallet: 3,600 lbs.
Joint spacing: 3/8" voids (full perimeter)
13.2% pervious surface area results in 100% permeability of pavement
ASTM Specifications
C936 requirement for 8000 psi
C140 requirement for absorption less than 5%
C67 requirement of 50 cycle testing for freeze/thaw durability
©2001-2008 County Materials Corporation 1-800-289-2569
info@countymaterials.com